Finishing the Hull

December 3, 2016 § Leave a comment

Okay, so it’s been a long time since the last update. Since I’m now into the sanding phase and I prefer blog updates (and just about anything else) to sanding, I thought this a good time to show some highlights.

clampsIn this shot, I’m just finishing up the football. Rather than strip on half of the football, cut along the centerline, and then strip the other half, I do both halves at the same time. This is the same technique as I used on my last canoe (seeĀ Starting the football). Apart from the finicky cuts, it enabled you to better match the color of the strips on either side. If you’re wondering about the bungee cords and clamps, this is the best way I’ve found to keep the strips firmly against the forms.

 

 


Of courlast-piece-2se, by the time you get to the last strip, you have to create a very narrow, slightly curved piece that you have

to size perfectly and insert into the gap. It’s a lot of fiddly work with the block plane, but the end result looks pretty good.

 

 

 

 


sanding-hull-2

And finally, with the hull done, we’re into the seemingly endless task of sanding. There are the usual gaps I have to fill in with epoxy and wood dust (aka dookie schmutz). Because this kayak is a bit lighter than the last one and dookie schmutz tends to be pretty dark, I’m going to try mixing some baking flour or talc into the mixture. We’ll see what happens.

 

Where Am I?

You are currently viewing the archives for December, 2016 at greybeard canoes & kayaks.